الرئيسية
الأبحاث العلمية
التدريس
التدرج الوظيفى
السيرة الذاتية
البحث الأكاديمى
إتصل بنا
الموقع الجديد
المجالات البحثية
Composite laminates
Finite element simulation
Impact an post impact on composite materials
Metal matrix nano composites
Testing and material charctrization
الابحاث العلمية
1 -
Effect of lattice structure evolution and stacking fault energy on the properties of Cu–ZrO2/GNP nanocomposites (2021).
2 -
Microstructural, mechanical and wear behavior of electroless assisted silver coated Al2O3–Cu nanocomposites (2021).
3 -
On the evolution of energy dissipation in dispersed composite laminates under out-of-plane loading (2021).
4 -
Effect of lattice structure evolution on the thermal and mechanical properties of Cu–Al2O3/GNPs nanocomposites (2021).
5 -
Electroless-plating of Ag nanoparticles on Al2O3 and graphene Nano sheets (GNs) for improved wettability and properties of Al–Al2O3/ GNs nanocomposites (2021).
6 -
Bio-inspired composite laminate design with improved out-of-plane strength and ductility (2021).
7 -
Effect of incorporating aluminum wire mesh on the notched and un-notched strengths of glass fiber/epoxy composites (2021).
8 -
Predictive model for indentation of elasto-plastic functionally graded composites (2020).
9 -
On the experimental determination of the J -curve of quasi-brittle composite materials (2020).
10 -
Micromechanical modeling of damage in elasto-plastic nanocomposites using unit cell representative volume element and cohesive zone model (2020).
11 -
Predictive model for indentation of elasto-plastic functionally graded composites (2020).
12 -
Hinged-3D metamaterials with giant and strain-independent Poisson’s ratios (2020).
13 -
Post-impact flexural behavior of carbon-aramid/epoxy hybrid composites (2020).
14 -
Correlation between micro/nano-structure, mechanical and tribological properties of copper-zirconia nanocomposites (2020).
15 -
Effect of tool pin side area ratio on temperature distribution in friction stir welding (2019).
16 -
Effect of Al2O3 nanoparticles content and compaction temperature on properties of Al–Al2O3 coated Cu nanocomposites (2019).
17 -
The dependence of accumulative roll bonded copper mechanical properties on grain sub-division, stacking faults, and lattice strains (2019).
18 -
The dependence of accumulative roll bonded copper mechanical properties on grain sub-division, stacking faults, and lattice strains (2019).
19 -
Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite (2019).
20 -
Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites (2019).
21 -
Predictive model for spherical indentation on elastoplastic nanocomposites: Loading and unloading behavior (2019).
22 -
Predictive model for spherical indentation on elastoplastic nanocomposites: Loading and unloading behavior (2019).
23 -
Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling (2019).
24 -
On the indentation of elastoplastic functionally graded materials (2019).
25 -
Effect of GNPs content on thermal and mechanical properties of a novel hybrid Cu-Al2O3/GNPs coated Ag nanocomposite (2019).
26 -
Improved mechanical and wear properties of hybrid Al-Al2O3/GNPs electroless coated Ni nanocomposite (2018).
27 -
Optimum milling parameters for production of highly uniform metalmatrix nanocomposites with improved mechanical properties (2018).
28 -
Improving compressibility and thermal properties of Al–Al2O3 nanocomposites using Mg particles (2018).
29 -
Experimental investigation on strengthening mechanisms in Al-SiC nanocomposites and 3D FE simulation of Vickers indentation (2018).
30 -
Experimental investigation and FE simulation of spherical indentation on nano-alumina reinforced copper-matrix composite produced by three different techniques (2017).
31 -
The effect of Mg add on morphology and mechanical properties of Al–xMg/10Al2O3 nanocomposite produced by mechanical alloying (2017).
32 -
Predictive model for the spherical indentation of composite laminates with finite thickness (2016).
33 -
Damage sequence in thin-ply composite laminates under out-of-plane loading (2016).
34 -
Synthesis of Nanocrystalline Al2O3 Reinforced Al Nanocomposites by High-Energy Mechanical Alloying: Microstructural Evolution and Mechanical Properties (2016).
35 -
Experimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction (2016).
36 -
Experimental investigation on the compressibility of Al/Al2O3 nanocomposites (2016).
37 -
Effect of Mg addition on mechanical and thermoelectrical properties of Al−Al2O3 nanocomposite (2016).
38 -
Experimental investigation and FE simulation of nano-indentation on Al–Al2O3 nanocomposites (2016).
39 -
A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates (2016).
40 -
Effect of milling time on morphology and microstructure of Al-Mg/Al2O3 nanocomposite powder produced by mechanical alloying (2014).
41 -
Mechanical properties of Al–Mg/Al2O3 nanocomposite powder produced by mechanical alloying (2014).
42 -
Effect of Mechanical Milling on the Morphologyand Structural Evaluation ofAl- Al2O3 Nanocomposite Powders (2014).
ملخصات الابحاث
تحميل
تسجيل الدخول
دخول
2014 all rights reserved.
Zagazig University
جامعة المنصورة
جامعة الاسكندرية
جامعة القاهرة
جامعة سوهاج
جامعة الفيوم
جامعة بنها
جامعة دمياط
جامعة بورسعيد
جامعة حلوان
جامعة السويس
جامعة المنيا
جامعة دمنهور
جامعة المنوفية
جامعة أسوان
جامعة جنوب الوادى
جامعة قناة السويس
جامعة عين شمس
جامعة أسيوط
شراقوة | الشرقية بين ايديك
اخبار الشرقية - شراقوة | الشرقية بين ايديك
جامعة كفر الشيخ
جامعة السادات
جامعة طنطا
جامعة بنى سويف